Ph: 412.486.2627
Fax: 412.486.0914
Email: sales@targetindustrial.com

970 Route 8
Glenshaw, PA 15116

TEFMET Gaskets

gas04TEFMETFeatures virgin PTFE combined with a perforated stainless steel insert.

Key Benefits

  • Pure virgin PTFE
  • Perforated Stainless Steel insert prevents cold flow
  • Self centers on bolts equals easy installation
  • Recyclable
  • Resistant against all media
  • No porsity
  • Gas tight
  • No distortion of the gasket at high pressure or with pressure surges due to the 0.5mm thick metal insert

 

Material Selections:

Kroll & Ziller’s G-ST line comes in a variety of materials to suit almost any need.

  • FPM-S – Temp. tmax. -4 to +392 degrees F, Shore -A-hardness 80 (+/-5)
  • EPDM – Temp. tmax. -22 to +248 degrees F, Shore -A-hardness 70 (+/-5), FDA Approved
  • NBR – Temp. tmax. -13 to +158 degrees F, Shore -A-hardness 80 (+/-5), FDA Approved
  • HNBR – Temp. tmax. -4 to +302 degrees F, Shore -A-hardness 75 (+/-5)
  • CSM – Temp. tmax. -4 to +248 degrees F, Shore -A-hardness 70 (+/-5)
  • NR – Temp. tmax. -13 to +158 degrees F, Shore -A-hardness 60 (+/-5
  • IIR – Temp. tmax. -13 to +248 degrees F, Shore -A-hardness 55 (+/-5)
  • CR – Temp. tmax. -13 to +203 degrees F, Shore -A-hardness 63 (+/-5)